vgmrips

The forum about vgm files
It is currently 2017-08-22, 14:53:17

All times are UTC + 1 hour [ DST ]




Post new topic Reply to topic  [ 23 posts ]  Go to page Previous  1, 2
Author Message
 Post subject:
PostPosted: 2016-05-31, 17:03:35 
Online

Joined: 2014-12-30, 1:38:48
Posts: 45
Deflemask seems difficult in importing midi and vgm files.


Top
 Profile  
 
 Post subject:
PostPosted: 2017-08-07, 11:23:57 
Offline

Joined: 2014-11-29, 21:36:08
Posts: 19
hi, cool converter, i like the 2612 versión of the midto vgm, but, i dont' understan the cannel 10 spesificasions, says dac, but, no samples yet, this emulator is just for the 2612 fm section, or tthe samples

_________________
My favorite sound chip?, YM-2413!


Top
 Profile  
 
 Post subject:
PostPosted: 2017-08-19, 4:28:51 
Offline

Joined: 2014-11-29, 21:36:08
Posts: 19
hi, i'm absolutley impressed with your 4 midi convertion tools to make vgm music, i dont want to use a tracker, so as a pro musician that working with digital audio workstations and midi an real time song editing, this 4 tools is exactley that i looking for!.
dont led this Project dye!, keep updateing!.
i have some ideas or suggestions for future releaces.
First, sorry for my verry bad english but i guess that i try the best as i can.
Why not to compile all of your 4 tools in just one software, that can make the conversions in one plase, and no more separatley that shood called, mid2 vgm pro.
here is my ideas.
1: all the 3.5 conversions in one software.
2: multichip support to convert a midi file with 2 or more chips at once
Support for more sound chips based on the vgm 1.70 spesifications.
3: support for ai3-8910, n2a03, and more to come.
4: a pop up menú that the user can sellect in which soundchip want's to process the midi file, and a sellect all button tu make a conversión for only 1 chip.
5: a tiny channel editor that can configure the basic parameters of the midi sequence before exporting as vgm.
6: a preview button for auditioning the results in real time, before converting in to vgm, this led the user doing last minut changes.
7: convert the final results in to vgm, and mp3, you can use the lame encoder for this.
8: the pro versión must be a shareware or donasionwaer to continue of the development.
again, thank you for this programs to convert midi files in to vgm, now i can make chiptunes all the time!, thanks, gracias!

_________________
My favorite sound chip?, YM-2413!


Top
 Profile  
 
 Post subject:
PostPosted: 2017-08-19, 10:55:21 

Staff Staff
Programmers Programmers
Musicians Musicians
Contributors Contributors
Offline
User avatar

Joined: 2011-12-01, 20:20:07
Posts: 2772
Location: Germany
Sorry for the late reponse.

midi2vgm 2612 can export DAC sounds. But it only exports the drum sounds that are defined in DAC.ini.
DAC.ini must be in the same folder as midi2vgm.exe. It allows you to set a .wav file* for every possible drum note.
* Those wave files must use no compression (raw PCM) and can be 8/16 bit.
I recommend to always comment out the .ini sections for sounds you don't need right now, because midi2vgm always dumps every sound from DAC.ini into the VGM. (even if they are not used)


About those mid2vgm tools in general: They are effectively dead since 2015. I didn't work on them for years now and I don't plan to do anything with them in the future.


Top
 Profile  
 
 Post subject:
PostPosted: 2017-08-19, 22:40:43 
Offline

Joined: 2014-11-29, 21:36:08
Posts: 19
hi there, it's a petty that no longer make updates for this tolos.
but i have 2 questions.
n which line of the ini file can i put the unused samples?.
and, this question is about the mid to smps.
the ym2612 with dac Works well in the convertion, but no psg sounds in the channels 7 to 9.
and, if i make a smps file who acan i convert to vgm?.

_________________
My favorite sound chip?, YM-2413!


Top
 Profile  
 
 Post subject:
PostPosted: 2017-08-20, 10:04:19 

Staff Staff
Programmers Programmers
Musicians Musicians
Contributors Contributors
Offline
User avatar

Joined: 2011-12-01, 20:20:07
Posts: 2772
Location: Germany
You don't put unused samples "at a line". Each sample gets a section in the .ini file and you just comment out what you don't need. (Commenting out the "File =" line should be enough to make midi2vgm 2612 skip it.)
How it works should be pretty obvious if you open DAC.ini with notepad.

About mid2smps: MIDI channels 1..6 = FM 1..6, MIDI channels 11..13 = PSG 1..3.
I usually convert them to VGM using SMPSPlay and I posted that in the mid2smps topics as "preview package".
EDIT: Alternatively you just use a disassembly of Sonic 1 (MegaDrive), put your track into the ROM and log that to VGM using an emulator.


Top
 Profile  
 
 Post subject:
PostPosted: 2017-08-21, 23:28:05 
Offline

Joined: 2014-11-29, 21:36:08
Posts: 19
thakn you bally, im verry apreciate your commment

_________________
My favorite sound chip?, YM-2413!


Top
 Profile  
 
 Post subject:
PostPosted: 2017-08-22, 9:59:13 
Offline

Joined: 2014-11-29, 21:36:08
Posts: 19
hi, another estion, is there any way to change samplse dac in midi smps, or not?

_________________
My favorite sound chip?, YM-2413!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page Previous  1, 2

All times are UTC + 1 hour [ DST ]


Who is online

Users browsing this forum: Google Feedfetcher and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group