I converted Daytona USA from MultiPCM to OPL4.
Daytona USA (OPL4).zip
The Yamaha YMW258-F aka MultiPCM is the ancestor of the WAVE section of the Yamaha YMF278B OPL4, so there are a lot of similarities, but the conversion applies dynamic channel (re-)remapping to get the channel count down from 28 to 24.
The longer tracks need an OPL4 with 2 MB of sample memory.
MultiPCM to OPL4 conversions
Original compositions, as well as ports and remixes of existing songs, can be posted in this forum, as long as they are in VGM format of course.
Moderator: Staff
And I also converted the other MultiPCM packs to OPL4:
MultiPCM to OPL4 conversions.zip
I haven’t tested these as thoroughly as Daytona, but in a superficial inspection they sound good. Missing are Virtua Fighter and Virtua Racer; those use two MultiPCM chips and my converter doesn’t support that (I couldn’t really play them on my MSX).
MultiPCM to OPL4 conversions.zip
I haven’t tested these as thoroughly as Daytona, but in a superficial inspection they sound good. Missing are Virtua Fighter and Virtua Racer; those use two MultiPCM chips and my converter doesn’t support that (I couldn’t really play them on my MSX).
Converted using Re-Play. See the multipcm target in the Makefile.